Built Wide. Built Wild.

The Sea-Trex Sea-Force Cab is built for the big days and the long runs—serious plate boats with an 80s edge.

In 570 and 600 sizes, these tough rigs serve up wide beams, solid 3 mm plate alloy, and a cabin that keeps you covered when the weather turns.

Think offshore muscle with retro attitude—bold lines, plenty of grunt, and space to chase fish or kick back for the ride home.

The Sea-Force Cab isn’t just a boat—it’s your ticket to turning every trip into an adventure worth remembering.

570 SEA-FORCE CAB

Max HP - 140hp
Depth - 1.45m
Weight - 845kg
Length - 5.70m
Beam - 2.45m
Seating Capacity - 6 adults
- 4mm 5083 high tensile Keel Sheets
- 4mm 5052 Side Sheets
- 4mm Bulkheads and frame matrix welded to hull – not floating
- Full height transom with twin boarding platforms
- Walk through Transom door
- Fully welded gunnels and side decks
- Extruded Side Decks
- Enclosed rear transom with twin hatches
- Large aluminium anchor well
- Aluminium Half cabin with opening hatch & fixed hard top
- Large cabin design allows for spacious bunks
- Large dash facia for oversize electronics
- Tinted wrap around windscreen
- Hydraulic steering
- Sports Steering wheel
- Pedestal mounted folding helm seats
- Folding rear lounge and backrest
- Tinned marine wiring harness with battery switch
- 5 gang switch panel with 12V socket
- 12V Auto bilge pump
- LED Navigation lights and Anchor light
- Carpeted floor
- Australian Standards Approved underfloor foam floatation
- Long range aluminium fuel tank with sender unit (175LT -
- 570 / 200LT - 600)
- Heavy-duty dive boarding ladder
- Low 32mm Bow rails
- Heavy-duty bow sprit with double rollers and rope keepers
- 32mm Transom rails
- 32mm Side rails
- Large side pockets x 2
- Aluminium Rod Holders x 4
- Welded Alloy Cleat in Anchor Well x 1
- Welded Alloy Cleats on Transom x 2
- Cup holders x 2
- Transducer Brackets x 2
- Painted white in and out
- Anchor Winch Brackets
- Custom decals - two colour
- Paint - two tone
- Electric motor mount
- Rod holders x 2
- Cabin bunk cushions & infill
- 5mm 5083 HT bottom sheet upgrade
- Trim tabs
- Underfloor kill tank
- Bait board with bait tank
- Removable bait board
- Dual battery rigging
- Plumbing of bait tank
- Saltwater deck wash

DOWNLOAD SPECS

600 SEA-FORCE CAB

Max HP - 150hp
Depth - 1.50m
Weight - 890kg
Length - 6.00m
Beam - 2.50m
Seating Capacity - 6 adults
- 4mm 5083 high tensile Keel Sheets
- 4mm 5052 Side Sheets
- 4mm Bulkheads and frame matrix welded to hull – not floating
- Full height transom with twin boarding platforms
- Walk through Transom door
- Fully welded gunnels and side decks
- Extruded Side Decks
- Enclosed rear transom with twin hatches
- Large aluminium anchor well
- Aluminium Half cabin with opening hatch & fixed hard top
- Large cabin design allows for spacious bunks
- Large dash facia for oversize electronics
- Tinted wrap around windscreen
- Hydraulic steering
- Sports Steering wheel
- Pedestal mounted folding helm seats
- Folding rear lounge and backrest
- Tinned marine wiring harness with battery switch
- 5 gang switch panel with 12V socket
- 12V Auto bilge pump
- LED Navigation lights and Anchor light
- Carpeted floor
- Australian Standards Approved underfloor foam floatation
- Long range aluminium fuel tank with sender unit (175LT -
- 570 / 200LT - 600)
- Heavy-duty dive boarding ladder
- Low 32mm Bow rails
- Heavy-duty bow sprit with double rollers and rope keepers
- 32mm Transom rails
- 32mm Side rails
- Large side pockets x 2
- Aluminium Rod Holders x 4
- Welded Alloy Cleat in Anchor Well x 1
- Welded Alloy Cleats on Transom x 2
- Cup holders x 2
- Transducer Brackets x 2
- Painted white in and out
- Anchor Winch Brackets
- Custom decals - two colour
- Paint - two tone
- Electric motor mount
- Rod holders x 2
- Cabin bunk cushions & infill
- 5mm 5083 HT bottom sheet upgrade
- Trim tabs
- Underfloor kill tank
- Bait board with bait tank
- Removable bait board
- Dual battery rigging
- Plumbing of bait tank
- Saltwater deck wash